Waterproofing your leather shoes (as well as some types of cloth shoes) is essential to surviving winter weather, since water can damage or completely ruin leather. All waterproofing solutions work similarly to create a thin barrier on the surface of your leather that cannot be permeated by water.   Before you start the waterproofing process, take a close look at your shoes and determine what type of leather and other materials it is made of. Look into the shoe box for any special cleaning instructions that you will need to keep in brain. Then select a protecting product that is made for your type of leather.   For waterproofing shoes, you may select whether spray or a semi-solid wax product. Sprays are simpler to use, but may well not be able to provide a good thick protecting coat.best site hereOn the other hand, you ought not use a spray (which usually consists of silicone) on thin, fragile leathers. The manufacturer of this leather may recommend a basic semi-solid product for water proof shoes.   Before you get started waterproofing, do a "spot test" on a small, hard-to-see area on your shoes. A good spot is somewhere inside the shoes, such as on the underside of the tongue. If you notice any color or texture changes, or any damage, stop and don't use the product. Contact the maker of your shoes to know how to proceed.   If all moves well, you can commence waterproofing leather. Some waxy products contain a brush, and some are rub-on. In case utilizing a rub-on product, get an easy, soft, cloth. Go through the directions first - most likely, they will tell you to rub in slow circular motions also to apply more than one coat for waterproofing shoes.   If you use a brush, the process is much the same, except that you can make slower circular motions with the brush, and try to apply a bit of pressure so that the brush can get deep into cracks. However, be sure to are utilizing a soft brush specially made for this purpose, otherwise you might scratch the shoes. Experts usually recommend that a brush be used for fabric water proof, as well.   Speaking of cracks, whether utilizing a towel or brush, you will need to spend extra attention on all seams, cracks, raised areas, and any imperfections in the leather. Slather a little extra on these areas in order that it can really sink in, and rub copiously. Replicate up to three times if necessary to water-proof these important areas.